Toyota Prius OEM Headlight Bulb Replacement Guide

2019 Toyota Prius ChartBulb Number
Headlight Bulb High Beam and Low Beam
LED
Headlight Bulb High Beam
LED
Headlight Bulb Low Beam
LED
Center High Mount Stop Light Bulb
LED
Brake Light Bulb
LED
License Plate Light Bulb
LED
Tail Light Bulb
LED
Daytime Running Light Bulb
LED
Turn Signal Light Bulb Rear
7440A
Back Up Reverse Light Bulb
921
Side Marker Light Bulb Front
LED
Side Marker Light Bulb Rear
LED
Parking Light Bulb(with LED parking Lights)
LED
Parking Light Bulb(without LED parking Lights)
7444NA
Turn Signal Light Bulb Front(with LED parking Lights)
7440A
Turn Signal Light Bulb Front(without LED parking Lights)
7444NA
Vanity Mirror Light Bulb
194
Vanity Mirror Light Bulb
7441
Trunk or Cargo Area Light
168
Trunk or Cargo Area Light
917
Dome Light Bulb
DE3175
Map Light Bulb
168
Map Light Bulb
917
Interior Door Light Bulb
168
Interior Door Light Bulb
917

Your Toyota headlights, brake lights and tail lights should be in perfect condition. This is because they play a crucial role in ensuring that you, your family, and other motorists arrive alive. Bad light bulbs and broken lights put everyone at risk. In addition, they can earn you a ticket from the authorities. Carry out regular checks on your Toyota Prius to ensure that light bulbs are functioning properly. If you need a replacement, shop only for OEM parts and be wary of aftermarket imitations.

Toyota Prius Headlight Bulb Size Chart

Your Toyota Prius may need a new High Intensity Discharge Headlight kit or Xenon headlamp kit. In addition you may need to replace your interior bulbs with SMD or LED bulbs. The first step should be to find out the right bulb replacement size for your Toyota Prius.

The Toyota Prius headlight bulb replacement guide is built to provide visitors with an online catalogue that includes details about all the Toyota bulb sizes and replacement processes. It covers changing a broken light bulb, replacing existing bulbs for new ones, and the installation of HID and LED bulbs. This cuts off on some of the hours spent trying to figure out what to do.

The information is listed for free but should be utilized carefully. This is because there is no warranty. Confirm with your car dealership or vehicle manual that you have all the right requirements.

Aftermarket Light Bulbs: Upgrade Options

There’s a comprehensive collection of stylish brake lights, extra bright headlights, and fashionable tail lights available for your Toyota Prius. These are built to the highest quality standards and are guaranteed to work even under bad weather conditions.
Installation & Diagrams
The headlight replacement guide below covers replacement of the high beam, low beam, front side marker, parking light, fog light and front turn signal bulbs in the 2010-2015 Toyota Prius.

2012 Prius Headlight

Low Beam – Cloudy Eye

Reach Behind Headlight
The replacement bulbs that will be used here are: High Beam 9005 or #HB3, Low Beam #H11, Side Marker #2825, Front Parking Light #2825, Fog Light #5202 or H16, and Front Turn Signal #7440A or 992.

1/4 Turn Counter Clockwise

Press Tab – Unplug Bulb

Old # H11 Low Beam
• Reach the low beam bulb from the back of the headlight assembly and turn it using its base in a counterclockwise direction.
• Pull the bulb out and release the tab to remove the power connector.

Philips H11 LL 12V 55W

New H11 Bulb

Insert New Low Beam Bulb
• Install the new H11 low beam bulb and rotate it in a clockwise direction to secure it into the headlight assembly. Use a clean paper towel dampened with alcohol to clean off any dirt, oil, or fingerprints from the bulb.

1/4 Turn Clockwise

Push On Power Connector

High Beam Bulb
• Push the power connector back into place and ensure that it sits firm.
• Reach the high beam bulb from the bottom corner of the lighting unit near the vehicle’s center line.

High Beam Bulb Base

1/4 Turn Counter Clockwise

Pull Out High Beam
• Rotate the bulb’s black base in a counter-clockwise direction from behind the assembly. Pull it out.

Press Plug Release Tab

High Beam Bulb Removed

Sylvania HB3 9005 60W
• Press the tabs to release the power connector.
• Install the new 9005 or HB3 high beam bulb into the headlight unit and turn it clockwise to fix it in place.

Insert New High Beam

1/4 Turn Clockwise

Front Parking Light
• Re-install the high beam bulb power connector and make sure it clicks into place.
• Locate the front parking light bulb from the top corner of the headlight housing.

1/4 Turn Counter Clockwise

Pull Out Old 2825 (168) Bulb

1/4 Turn Clockwise
• Reach out to the small plastic base of the parking light bulb and rotate it anticlockwise.
• Pull out the existing bulb and install the new #168 or 2825 into the socket.
• Push the parking light socket back into the headlight housing and turn it clockwise to fix it into place.

Front Side Marker Light

Reach In – 1/4 Turn CC

Pull Out Old # 168 / 2825
• Locate the front side marker light bulb from the lower outer edge of the assembly.
• Reach for the engine bay and turn the small plastic side marker bulb socket anticlockwise and pull it out of the assembly.
• Remove the #2825 bulb out of the socket and install a new #2825 bulb.

Test New Headlight Bulb(s)

Testing High Beam Bulb

Turn Signal & Fog Light

• Turn on the headlights and test the new bulbs.

Related Cars

Honda Accord Hybrid, Toyota Avalon Hybrid, Toyota Camry Hybrid , Honda Insight, Toyota Corolla Hybrid, Hyundai Ioniq, Chevrolet Bolt, Ford Fusion Hybrid

Leave a Comment