Headlight Size

Nissan Xterra Headlight Replacement Guide


Nissan Xterra is the all-rounder in case of performance and fuel efficiency, especially the post-facelift models that have reached a new level of popularity compared to the initial launch.

Regardless of the exceptional performance of the Nissan Xterra in every type of road condition, you need to make sure that the car’s headlight is always in working condition. 

Considering the usual usage of the car, the headlight replacement will be a significant issue. In order to direct you, we put together a complete and thorough Nissan Xterra headlight replacement guide.

  1. When we talk about replacing a headlight compartment or even the bulbs of the headlight panel, there’s one thing to check. Make sure that we have the right tools to get the job done, otherwise, you will have to drive to the nearest store.
  2. Before going into the technicalities of the whole process, let’s talk about what experts say about this. The whole replacement process is super easy on a three-point difficulty scale. Even with no prior experience, it will take around 5-15 minutes to get the job done if you follow our Nissan Xterra headlight replacement guide.
  1. The main bulb you will be dealing with is the headlight bulb itself. Pop up the hood so you can access the main headlight bulb panel. The hood button is located right next to the lower right end of the steering wheel.
  1. Once the hood button is successfully pulled out, you will hear a ‘pop’ sound. The pop sound indicates that the hood is finally open, and you can get out of the car now. Find the hood opening lever located in the center of the front grill.
  1. Remember to place the hood support once the hood is open securely. Not doing so can result in some real tragic accident if you do not pay much attention to it. Once the hood support is locked in, you can start working on the headlight panel.
  1. All headlight bulbs will be placed inside the same headlight panel on respective ends. To start carefully taking out every single one of the bulbs, you need to disconnect the main power inlet of the headlight. The inlet will be market with a red-colored end.
  1. Once the power inlet is out, you need to focus on the retaining clip of the headlight compartment. A slight counterclockwise rotatory movement can quickly take out the retaining clip. Once the clip is free, let it hang freely.
  1. Also, make sure you don’t exert much force on the retaining clip as the main headlight bulb is placed right after it. Now, carefully remove the headlight bulb with a counterclockwise motion that will help you pull the bulb straight right out without any damage to the screws or the clips.
  1. In the end, here’s a precaution you need to follow at all costs. Make sure that the replacement bulb is clear of any dirt or marks. It can diminish the headlight’s performance once everything is back in its place.

Final note

Our Nissan Xterra headlight replacement guide takes you step-by-step to have a solid understanding of the complete headlight replacement process. These steps are approved by experts and are ready to be followed as stated. After all, what’s the point of spending money on something you can easily do by yourself in your garage!


Leave a Reply

Your email address will not be published.