Jeep Patriot Headlight Bulb Size

2017 Jeep Patriot ChartBulb Number
Headlight Bulb High Beam and Low Beam
Center High Mount Stop Light Bulb
Brake Light Bulb
Turn Signal Light Bulb Front
License Plate Light Bulb
License Plate Light Bulb
Parking Light Bulb
Tail Light Bulb
Turn Signal Light Bulb Rear
Back Up Reverse Light Bulb
Side Marker Light Bulb Front
Side Marker Light Bulb Rear
Trunk or Cargo Area Light
Dome Light Bulb
Map Light Bulb

The Jeep Patriot is a five-door compact SUV that debuted in April 2006. Its production ran until 2017, which marked the last year for the car. It was then replaced by the Jeep Compass, its mechanical twin. Headlights mostly remained unchanged with most models featuring halogen headlights.

Bulb type used

For the 2017 model year, the Jeep Patriot utilized the H13 bulb for both the high beam and low beam headlights. Before that, it used the 9008 bulb from 2007 going forwards. The front fog lights utilized the 9145 bulb for the 2007-2009 model years and the PSX24W for the 2010-2017 model years.

Upgrading from factory bulbs to aftermarket LED/HID

When upgrading your headlights, it’s important to avoid touching the glass surface of the new bulb. Contamination from dirt natural oils such as those found on the skin can reduce the lifespan of the bulb. You can use small amounts of dielectric grease to provide a durable connection on all terminals and lamp plugs.

Advantages of upgrading headlights from halogen to LED/HID technology

  1. Long-lasting: LED and HID lamps last longer than halogen lamps.
  2. Improves safety as LEDs and HIDs don’t dazzle oncoming traffic.
  3. They provide a larger light spectrum compared to halogen lamps.
  4. They are available in different styles, hence improve the look of the car.

How to choose the correct bulb size of the LED/HID lamp

1. Online catalogs

A quick search on our website will help you determine the correct bulb size for your LED/HID lamps. All you’ll need to do is choose your type of car, model, and year of manufacture.

2. Contact your manufacturer

You can call your vehicle manufacturer or dealer to ask for the correct bulb size for your LED/HID lamps. You will be required to provide your Vehicle Identification Number (VIN).

3. Check your factory bulbs

Vehicle manufacturers normally indicate the bulb size/part number on the bulb itself before installing it in a vehicle. You can take out your old bulbs to check for their part/size numbers. The replacement bulb you buy should be a direct match to that number.

4. Read your vehicle’s manual

As you peruse through your vehicle’s manual, search for bulb replacement details. You will find the bulb size that you need indicated there.

Installing new bulbs

The process of installing a new bulb on the Jeep Patriot is easier than in most cars. It does not require you to remove the headlight housing.

  1. Open the hood of your Jeep Patriot.
  2. Move to the headlight whose bulb you’d like to replace.
  3. Locate the bulb form the back of the headlight housing and turn it towards the right.
  4. Push the clip that holds the bulb backward to remove the old bulb.
  5. Install the new bulb and test it to see if it works.

Q&A Section

Are all 9012 bulbs HIR?

Yes. The 9011 and 9012 are the only HIR bulbs that exist. They replace the 9005 and 9006 bulbs respectively.

Can I use 9006 instead of 9005?

No. The 9006 bulb will not fit in 9005 socket but the 9005 will fit in the 9006 socket.


  • Model years (2007–2017)
  • 2010 Jeep Patriot
  • 2012 Jeep Patriot
  • 2014 Jeep Patriot
  • 2015 Jeep Patriot
  • 2016 Jeep Patriot
  • 2017 Jeep Patriot


Leave a Comment