- Are H11 and H8 the same?
- Can H11 replace H8?
- What is the difference between H8 and H11 LED bulb?
- What does H8 mean in headlights?
- Can I use H11 for high beams?
- What vehicle does a H11 bulb fit?
- Are H7 and H8 bulbs the same?
- How many watts is an H8 bulb?
- Are H8 and H16 the same?
- What does the H mean in headlight bulbs?
- Is H11 same as 9005?
- Is H11 LED bulb low beam?
- Are H11 bulbs for fog lights?
- Are all H11 bulbs the same?
- Can I replace a H9 bulb with H11?
These bulbs are the two most popular types of headlight bulbs on the market. H8 and H11 bulbs are both used for low beam headlights. So, which one is better?
Are H11 and H8 the same?
One of the most intriguing things about automobile headlights and fog light bulbs is that they are often cross-compatible or equivalent. For example, the H11 bulb is comparable to the H8, H9, and L-Shaped H16 light. The H8 is also comparable to the 9005, HB3, and 9011.
Cross-compatibility is great news because it means that you can usually find a replacement bulb even if you don’t have the original one on hand. It also means that there is some leeway when it comes to choosing the right bulb for your car. You may not always be able to find an exact match, but you should be able to find a close enough match that will work just as well.
The main characteristics of H8 and H11 light bulbs are as follows:
- Tight beam pattern
- Less light spillover onto oncoming traffic
- Brighter light overall
- Blue tinted light
- Wider beam pattern
- More light spillover onto oncoming traffic
- Softer light overall
- Yellow tinted light
As for general characteristics, H8 and H11 bulbs are very similar. The brightness level of H8 and H11 bulbs is about the same, as is the life expectancy. Both types of bulbs will last for about 2000 hours before they need to be replaced. The color temperature of H8 and H11 bulbs is also similar, with both falling in the 6000K range. The nominal output of each bulb for the H8 is 35 watts and for H11 is 55 watts. Both these lamps have 1 filament which means they will emit light in a single direction.
So, both these bulbs are pretty similar, but there are some key differences between them. The main difference is in the beam pattern. H8 bulbs have a tighter beam pattern, which means that they don’t spill over as much onto oncoming traffic. This can be beneficial if you live in an area with a lot of night-time traffic. H11 bulbs have a wider beam pattern, which means that they do spill over more onto oncoming traffic. This can be beneficial if you live in an area with less night-time traffic.
Can H11 replace H8?
H8 and H11 bulbs are nearly identical in size. In fact, H8 bulbs will fit snugly into an H11 housing with just a little finagling. They are almost 98% close in size. The only difference is in the length of the plug. The H8 has a shorter plug, while the H11 has a longer one.
This means that you can replace your H8 bulbs with H11 bulbs without any issues. In fact, many people do this because they prefer the wider beam pattern of the H11 bulbs. It’s a simple swap that anyone can do in just a few minutes.
What is the difference between H8 and H11 LED bulb?
The two bulbs have a few differences, the most significant of which is that the locking tab on each is distinct to prevent you from using the incorrect bulb. These can be filed down and fitted into an H8 holder if you want to use them in an H11 light fixture.
H8 LED bulbs are available that have a single high-power LED. Newer H11 LED bulbs have clusters of low-power LEDs. The older H8 style is being phased out in favor of the newer H11 style. The reason for this is that the newer bulbs offer better light output and beam patterns.
What does H8 mean in headlights?
It is the size of the headlight. H8 is 8/8ths or one inch in diameter. This is a European measurement system where everything is metric. In America, we use the SAE (Society of Automotive Engineers) system where we measure bulbs in eighths of an inch. So, an H11 bulb would be 1-3/16″ or just over one inch.
The reason that this matter is because the housing for H8 and H11 bulbs are different sizes. This means that you can’t put an H8 bulb into an H11 housing (and vice versa). So, your headlights must be designed to use either H8 or H11 bulbs – you can’t mix and match.
Can I use H11 for high beams?
In general, car headlights have two types of light beams: low and high. Of the three options given above, only 9005 bulbs are for high beam headlights, while 9006 and H11 bulbs are for low beam lights. So if you’re looking to upgrade your car’s headlights, H11 bulbs are not the way to go. If you’re still not sure which type of bulb you need, consult your car’s owner manual or ask a professional at your local automotive store.
High beams are usually used when you’re driving on open roads with little to no traffic. They allow you to see further ahead, which can give you more time to react to any potential hazards. Low beams, on the other hand, are designed for use in city and suburban areas where there are streetlights and other cars on the road.
So, in short, H11 bulbs cannot be used for high beam headlights – only low beams. If you’re unsure about which type of bulb you need for your car, consult your owner manual or ask a professional at your local automotive store.
What vehicle does a H11 bulb fit?
The most popular H11-size bulb is used on a wide range of vehicles, including the 2012-2015 Toyota Tacoma, 2019+ Ford Ranger, and 2012-2016 Honda Civic Si. The H11 bulb also fits a variety of other vehicles, so be sure to check your owner’s manual or ask a professional at your local automotive store to see if it’s the right fit for your car.
Are H7 and H8 bulbs the same?
While H7 and H8 bulbs may look similar, they are not interchangeable. H7 bulbs are for low beam headlights, while H8 bulbs are for fog lights. If you’re unsure about which type of bulb you need for your car, consult your owner manual or ask a professional at your local automotive store.
How many watts is an H8 bulb?
With the socket PGJ19-1, this bulb has a nominal power of 35 watts. The H8 bulb is a halogen headlight bulb. It is commonly used in European cars.
Are H8 and H16 the same?
The largest distinction among H8, H9, H11, and H16 models is the wattage output and if there’s a painted-on reflector cap on the glass tube. Usually, fog lights contain an an H16 model while headlights use an H11 model. The H8 and H9 models are used in Europe.
The issue is that H16 light bulb models are not legal in the United States for use as headlights. The H16 model is, however, allowed to be used as fog lights in the United States. It is important to know the difference and purchase the right type of headlight or fog light bulbs for your car or truck.
What does the H mean in headlight bulbs?
HID lamps have long dominated automobile lighting. These are known as bilux bulbs. This simply means that the bulb has two filaments: one for the low beam and one for the high beam. Moreover, the H designation in headlight bulbs stands for high-intensity discharge. These bulbs don’t have a filament that will burn out over time. Rather, they use an electrical arc to produce light.
As for headlights, HID bulbs are slowly but surely being phased out in favor of LED bulbs. These have a number of advantages over HID bulbs, including a longer lifespan, lower power consumption, and faster lighting response time.
Is H11 same as 9005?
While the two bulbs share the L-shape, they are not compatible. The H11 is a single low beam light, whereas the 9005 is high beam light with a high illumination capability. This bulb is not as commonly used as the H11 because most vehicles have separate high and low beam headlights.
Is H11 LED bulb low beam?
When looking for low beam bulbs, H11 may be a nice option. It is not as bright as some other options, but it does offer a nice, clean light. You will not have to worry about the bulbs blinding oncoming traffic.
Are H11 bulbs for fog lights?
Yes, this bulb is specially designed for fog lights. It is a lower wattage than other options, so it will not produce as much heat. This bulb is also designed to be used in cold weather conditions. The peculiarity of fog lights is that they should produce a wide and dispersed light beam to illuminate the road ahead without dazzling oncoming traffic. The H11 bulb is a popular choice for fog lights because it meets these requirements perfectly.
Are all H11 bulbs the same?
H11 bulbs come in different shapes, sizes, and colors. With so many options available, how do you know which one to choose? You need to realize, that not all H11 are the same. In fact, there are significant differences between the various types of H11 bulbs available on the market.
Can I replace a H9 bulb with H11?
You cannot replace H9 bulbs with H11 bulbs; however, you can trim a metal tab on the outside of the housing and a plastic tab within the connector housing to accommodate an H9 bulb. The process is much easier if you use micro side cutters as opposed to diagonal pliers or a Dremel.
You would need to cut the socket tongue down a bit for the H11 bulb to fit. You’d also have to trim the top flange so it matches the shape of the H9 bulb, but after that, it should work out fine. The only issue is that the H11 bulbs won’t be as bright as your current H9 high beams.
HID lamps have long dominated automobile lighting, but they are slowly being phased out in favor of LED bulbs. H11 bulbs are a popular choice for fog lights because they produce a wide and dispersed light beam. H8 bulbs are similar to H11 bulbs, but they have a smaller diameter. You cannot replace H9 bulbs with H11 bulbs, but you can trim a metal tab on the outside of the housing and plastic tab within the connector housing to accommodate for an H9 bulb.