GMC Canyon Bulb Size

2019 Gmc Canyon ChartBulb Number
Headlight Bulb High Beam
9005
Headlight Bulb Low Beam
H11
Center High Mount Stop Light Bulb
921
Brake Light Bulb
7443R
Turn Signal Light Bulb Front
7444NA
License Plate Light Bulb
2825
License Plate Light Bulb
98
Parking Light Bulb
7444NA
Tail Light Bulb
7443R
Turn Signal Light Bulb Rear
7443
Back Up Reverse Light Bulb
921
Side Marker Light Bulb Front
2825
Side Marker Light Bulb Front
98
Side Marker Light Bulb Rear
7443A
Vanity Mirror Light Bulb
6612F
Trunk or Cargo Area Light
921
Map Light Bulb
2825
Map Light Bulb
98

One of the most essential aspects of bulb replacement is the bulb sizes. To have a successful upgrade, you need to have the correct sizes, and this article will provide you with the information required.

Why would you need to replace the bulbs on your GMC Canyon?

In general, there are two main reasons why you would want to replace the bulbs.

The first and most important one is the fact that you should have all your light operations on your car. Non-working lights will not be able to provide the designed illumination of your surroundings. If you notice a bulb that is not working, you must replace it as soon as you can.

The newer models may come with some LED bulbs installed from the factory, depending on the trim level, but quite a lot of them will be HID bulbs. Most people want consistency, and that is the second reason to think about replacing the non-LED bulbs with LEDs.

What would the advantages be of making the replacement on my Canyon?

By replacing the old bulbs with LEDs, you are looking at several advantages.

LED technology has enabled manufacturers to produce bulbs that can last longer. As a comparison, HID bulbs can come with rated working hours of no more than 10 thousand hours, while LED bulbs usually come with a rating of around 30 thousand hours, with some reaching 50 thousand.

The long-life is only a part of the story. By replacing the halogen or HID bulbs with LEDs will provide additional lighting to your car. LED bulbs shine brighter and clearer than any other types of bulbs.

Steps for replacing a headlight bulb on a GMC Canyon

The procedure is easy, but you will need some tools.

The first step is to make sure that the power is completely disconnected. Above each headlight, there should be a plastic cover held by a few plastic clips. Removing the plastic will give you access to a plastic cover on the back of the headlight assembly. Removing the cover will provide you with access to the connector and the bulb. Unclip the metal holding the bulb and pull it out. Remove the connector and replace the bulb.

Will I be able to use the same bulbs from the Chevrolet Colorado?

Even though these two trucks may be similar in many aspects, the bulb sizes may not be the same. You will need to verify by comparing the sizes.

Can I purchase a package with all LED bulbs for my Canyon?

Yes, manufacturers are offering LED upgrade kits that include all bulbs that you may want to replace.

  • Second generation (2012–present)
  • First generation (2003–2012)

Related Cars

Ford Ranger, Honda Ridgeline , Chevrolet Colorado, Toyota Tacoma, Nissan Frontier, Jeep Gladiator

Leave a Comment