Dodge Charger OEM Headlight Bulb Replacement Guide

2019 Dodge Charger ChartBulb Number
Fog Light Bulb Front
LED
Headlight Bulb High Beam and Low Beam(with halogen headlights)
9005
Headlight Bulb High Beam and Low Beam(with HID headlights)
D3S
Center High Mount Stop Light Bulb
LED
Brake Light Bulb
LED
Turn Signal Light Bulb Front
LED
License Plate Light Bulb
LED
Parking Light Bulb
LED
Tail Light Bulb
LED
Turn Signal Light Bulb Rear
LED
Back Up Reverse Light Bulb
LED
Side Marker Light Bulb Front
LED
Side Marker Light Bulb Rear
LED
Glove Box Light Bulb
194
Glove Box Light Bulb
7441
Trunk or Cargo Area Light
562
Dome Light Bulb
578
Map Light Bulb
578
Interior Door Light Bulb
562
Reading Light Bulb Rear
2825
Reading Light Bulb Rear
98

Your Dodge Charger needs the perfect light bulb size in order for its lighting system to work properly. If you wish to replace your headlight bulb with a Xenon or HID headlight kit, or install light emitting diodes or SMD bulbs in place of your interior lighting bulbs, the right light bulb size will save you a lot of money and time.

In order to ensure that you have it correctly, get ahold of a Dodge Charger headlight bulb replacement guide. It contains all the things you need to have and know in order to change a broken light bulb, replace headlight bulbs, install LEDs and install a HID headlight conversion kit on your Dodge Charger.

Feel free to utilize the information available. Make sure to confirm all your bulb details including the voltage usage, wattage, and size before making any changes to your Dodge Charger headlight bulbs.

Dodge Charger Headlight Bulb Size Chart

The Dodge Charger isn’t complete without some extra bright exterior lights. There are a number of LED upgrades available on the market today. However, most comprise imitations that aren’t built to the manufacturer’s specifications. They may fail to either fit, work with the car’s electric system or focus the hotspot in line with the beam pattern. Some of them aren’t even built to last very long.

One of the best LED lights that defy all odds is the SL1 LED. It’s a compact light bulb that features flow-stimulated cooling, optically correct brightness, and high reliability. It’s the ultimate upgrade in terms of quality standards.
Aftermarket Light Bulbs: Upgrade Options

When driving leisurely down the road, it goes without saying that you must be able to clearly see wherever it is you’re going. Clear visibility is an important safety aspect. Sometimes, you may not be able to see clearly due to broken headlights. This could create potential dangers for you and your passengers.

Fortunately, there are plenty of headlight replacement options available in the market today. These span from Dodge Charger HIDs, LEDs, and Xenon headlights. You need to replace your Dodge Charger headlights if any of them starts to dim. It’s advisable that you replace both of them at the same time.

Installation & Diagrams

This guide takes you through the process of replacing any bulb within the headlight assembly for the 2006-2010 Dodge Charger.

Dodge Charger Headlight

Low Beam – High Beam

Turn Signal & High Beam
The following are the bulb patterns you should have with you before starting the installation: High Beam Light Bulb #9005XS, Front Side Marker Light Bulb #194, Low Beam Light Bulb #9006XS, and Front Turn Signal Light Bulb #3157A.

Rear of Headlight Assembly

Turn Signal / Parking Light

1/4 Turn Counter Clockwise
• The turn/parking signal bulb is at the edge of the headlight unit near the middle line of the vehicle.
• Find its socket from behind the assembly and turn it anticlockwise to remove it.

Pull Out Bulb Socket

Pull Out Turn Signal Bulb

Replace Light Bulb
• Install the new #3157A bulb into the socket and rotate it clockwise to secure it.

1/4 Turn Clockwise

High Beam Headlight

High Beam Bulb Connector
• The high beam bulb is placed at the center of the headlight housing.
• Rotate it anticlockwise by its base to remove it.

1/4 Turn Counter Clockwise

Pull Out High Beam Socket

High Beam Power Connector

Pry Up Connector Clip

Pull Out High Beam Bulb

Sylvania #9005XS
• Pry up the grey plastic clip holding the power connector in place and pull out the connector.

9005X/S DOT 12V 60W

Insert New High Beam Bulb

Bulb In Headlight Assembly
• Push in the new 9005XS high beam bulb and try as much not to touch the glass part. Wipe off any prints or oils with rubbing alcohol.
• Insert the socket back into the assembly and rotate it clockwise to lock it into place.

1/4 Turn Clockwise

High Beam Bulb Secured

Low Beam Headlight
• Locate the low beam headlight bulb at the outer edge of your Dodge Charger.

Reach In To Low Beam

1/4 Turn Counter Clockwise

Pry Off Power Connector
• Reach out to its socket from the back of the headlight assembly.
• Turn it anticlockwise to remove it.

9006X/S 12V 51W

9006XS Low Beam Bulb

Insert New Low Beam Bulb
• Remove the power connector using a small flathead screwdriver.
• Install the new #9006XS low beam bulb.
• Wipe off any smudges that you may find on the glass part of your new bulb with rubbing alcohol.

Low Beam In Headlight

1/4 Turn Clockwise

Side Marker Light
• Re-install the socket and new bulb into the headlight unit. Turn it clockwise to secure it.

Press Tab On Connector

Side marker Power Removed

1/4 Turn Counter Clockwise
• Locate the side marker light bulb at the edge of your headlight assembly.
• Squeeze your hand behind the headlight to reach the side marker bulb.
• Push the tab to release the power connector.
• Rotate the side marker bulb anticlockwise to remove it.

Install New Sidemarker

Testing Low Beam

High Beam & Turn Signal
• Replace the old side marker light bulb with the new #194 bulb.
• Return the new bulb and socket back into the headlight assembly. Make sure it’s secure.
• Replace the power connector onto the base of the bulb socket.
• Turn and flash your headlights to test the new bulbs. Activate the hazard also.

Related Cars

Buick LaCrosse, Chevrolet Impala, Toyota Avalon, Chrysler 300, Nissan Maxima, Kia Cadenza , Ford Taurus

Leave a Comment